Acromag’s New 6U VME Single Board Computer Features an Intel® Celeron® CPU

An FPGA Module designed for applications requiring low-power without sacrificing high performance.

Acromag’s new 6U VME 4th generation Intel® Core™ single board computer features a FPGA-based VME to PCIe-bridge that will extend the life of your VME system for cost-sensitive applications.

Acromag’s XVME-6700 is a high-performance 6U VME single board computer based on the Intel® Celeron® 2002E processor and utilises the Intel 8-Series QM87 QM87 PCH chipset for extensive I/O support. Two ruggedised SODIMMs offer 8GB or optional 16GB of high-speed DDR3L removable memory plus 8GB of flash memory. The air-cooled XVME-6700 features dual PMC/XMC sites, DVI-D display, and programmable CPU power limits for heat sensitive applications. Expansion capabilities for further customisation is available. VxWorks®, Linux® and Windows 7+ software support, ROHS compliance and extended temperature options are available.

The XVME-6700 product family is an excellent choice for new or tech refresh VME-based applications. Not only does it properly resolve the obsolescence of the TSI-148 VME interface chip, it provides the customer with an up-to-date product for at least another 7 years.

The XVME-6700 is a single board computer module that uses an Intel® Celeron® processor and the 6U VME64X VMEbus form factor. The board can support either one or two DDR3L ECC SODIMMs, for a total of up to 16GB. The SODIMMs are firmly attached to the module with screws and are surrounded by heat sink material to provide a mechanically and thermally robust mounting mechanism. Extended temperature models are available for operating in a -40°C to +75°C range. The two PMC/XMC sites can be used in any combination. An optional P0 connector allows two Gigabit Ethernet connections. Forego one PMC/XMC module and add the optional XBRD-9060 I/O expander module and increase I/O on the front panel and add two SSD mSATA drives. Also optional is the XVME-9640 rear-transition module for easy access to all P2 connector’s I/O signals.

For further information and if you are in Australia or New Zealand, please contact Metromatics on +61 7 3868 4255 or sales@metromatics.com.au

If you are outside this area, please contact Acromag directly on +1 248 295 0310 or solutions@acromag.com