Showing posts with label single board computer. Show all posts
Showing posts with label single board computer. Show all posts

Monday, 15 February 2016

Acromag’s New 6U VME Single Board Computer Features an Intel® Celeron® CPU

An FPGA Module designed for applications requiring low-power without sacrificing high performance.

Acromag’s new 6U VME 4th generation Intel® Core™ single board computer features a FPGA-based VME to PCIe-bridge that will extend the life of your VME system for cost-sensitive applications.

Acromag’s XVME-6700 is a high-performance 6U VME single board computer based on the Intel® Celeron® 2002E processor and utilises the Intel 8-Series QM87 QM87 PCH chipset for extensive I/O support. Two ruggedised SODIMMs offer 8GB or optional 16GB of high-speed DDR3L removable memory plus 8GB of flash memory. The air-cooled XVME-6700 features dual PMC/XMC sites, DVI-D display, and programmable CPU power limits for heat sensitive applications. Expansion capabilities for further customisation is available. VxWorks®, Linux® and Windows 7+ software support, ROHS compliance and extended temperature options are available.

The XVME-6700 product family is an excellent choice for new or tech refresh VME-based applications. Not only does it properly resolve the obsolescence of the TSI-148 VME interface chip, it provides the customer with an up-to-date product for at least another 7 years.

The XVME-6700 is a single board computer module that uses an Intel® Celeron® processor and the 6U VME64X VMEbus form factor. The board can support either one or two DDR3L ECC SODIMMs, for a total of up to 16GB. The SODIMMs are firmly attached to the module with screws and are surrounded by heat sink material to provide a mechanically and thermally robust mounting mechanism. Extended temperature models are available for operating in a -40°C to +75°C range. The two PMC/XMC sites can be used in any combination. An optional P0 connector allows two Gigabit Ethernet connections. Forego one PMC/XMC module and add the optional XBRD-9060 I/O expander module and increase I/O on the front panel and add two SSD mSATA drives. Also optional is the XVME-9640 rear-transition module for easy access to all P2 connector’s I/O signals.

For further information and if you are in Australia or New Zealand, please contact Metromatics on +61 7 3868 4255 or sales@metromatics.com.au


If you are outside this area, please contact Acromag directly on +1 248 295 0310 or solutions@acromag.com