Expansion of the DEWESoft Krypton Data Acquisition Product Line

KRYPTON DAQ modules are engineered precisely to withstand all conditions and operate flawlessly in cold places, hot places, dust, mud, water and snow. KRYPTONs are shock proof, vibration proof, milled out of a full block of aluminium and filled with rubber, making them fully water-proof.

DEWESoft are proud to announce that they have expanded the KRYPTON product line for the KRYPTON 6xSTG module.

The universal STG 10V amplifier runs with a sample rate that reaches up to 20 kHz per channel. Inputs are compatible with DSI adapters which can additionally support IEPE/ICP sensors, LVDTs, charge, thermocouple and more.

KRYPTON 6xSTG tech specs
Input Channels	6 channels Voltage, full bridge strain, ½ bridge strain, ¼ bridge strain
Input Signals	Voltage: ±10 V, ±1 V, ±100 mV, ±10 mV Compatible with DSI adapters
Input Connector	DSUB9
Sampling Rate	Simultaneous 100...20000 S/sec per channel (software-selectable)
ADC Type	24-bit oversampled SAR
Input Impedance	10 MΩ
Overvoltage protection	ln+ to ln-: 50 V continuous, 200 V peak (10 msec)
Input Accuracy	±0.03% of reading, ±0.02% of range, ±0.1 mV
Gain Drift	Typical 10 ppm/K (max 40 ppm/K)
Offset Drift	Typical 0.3 µV/K + 5 ppm of range/K, max 2 µV/K + 10 ppm of range/K
Bandwidth (-3 dB)	0.49·fs
Alias-free Rejection	-100 dB @ 0.547·fs
Excitation Voltage	Free programmable (16-bit DAC), Predefined Levels: 0, 1. 2.5, 5, 10, 15 VDC
Excitation Accuracy	±0.05 % ±2 mV
Excitation Drift	±50 ppm/K ±100 µV/K
Bridge Connection Types	Full bridge strain, ½ bridge strain, ¼ bridge strain (3-wire)
Ranges	2...1000 mV/V free programmable
Internal Bridge Completion	½ bridge and ¼ bridge 120 Ω and 350 Ω
Interface	LEMO 1T EtherCAT® cable (single cable connection power + sync + data)
Data Rate	100 Mbit bus speed
Power Supply Voltage	6 to 50 V DC
Power consumption	5.9 W (8.9 W load 120 Ω @ 5 V)
Weight	1100 g
Slice Dimensions	213 x 54 x 56 mm

For further information or pricing on all DEWESoft Products and Krypton 6xSTG in Australia & New Zealand, please contact Metromatics on +61 7 3868 4255 or sales@metromatics.com.au 

For outside this area, please contact DEWESoft directly on +43 31 32 2252 or sales@dewesoft.com

DEWESoft X2 - updates free for DEWESoft X Versions

DEWESoft's commitment is to make their software faster, more attractive and easier to use. As such, all updates are free of charge for all DEWESoft® X versions.

DEWESoft have released new DEWESoft® X2 SP8 Software. Download here to check out the latest features and improvements.

FEATURES, IMPROVEMENTS

• Added three new memory managers and the option to switch between them.
• Added display of EtherCAT SOEM version in add-ons info and driver used in device settings.
• Added DSIi-10A and DSIi-20A.
• Added auto-scaling for XY-graph.
• Corrected certain channel names from setup files in sequencer.
• Options expanded to included required fields.added
• SUM calculations according to German/French standard added in HBV.
• Retransmit support added for KryptonRTD.
• Hexadecimal values can now be used in CAN Tx for message/field 
• data (up to full 64 bit).
• Maximum number of ports increased to 16 for test CAN.
• Added custom HP filters for Sirius-ACCv2 and Sirius-ACCv2+.
• Supported firmware upgrade of unknown EtherCAT devices.
• Improved cursor visibility on GPS visual control.
• Option to set a custom maximum calculation delay in advanced settings.
• Offline CAN stability improvements to the reset expected frequency function.
• Support for per-user registration of add-ons.
• Ability to disable project warnings.
• Possibility to add event on alarm.
• Flow control select option added for COM port in sequencer.
• Added access to a data file's start time in sequencer.
• Added copy/paste buttons in time reference curve.
• Added support for per-user registration of add-ons (no admin rights needed).
• Added expand, collapse option to group column.
• Added custom images option for input visual control.

For further information or pricing on all DEWESoft Products and DEWESoft X2 Software in Australia & New Zealand, please contact Metromatics on +61 7 3868 4255 or sales@metromatics.com.au 

For outside this area, please contact DEWESoft directly on +43 31 32 2252 or sales@dewesoft.com