Dewesoft - Motor and Inverter Testing Application

Combined motor and inverter testing is the Power Analysers king’s class and affords a high number of input channels for voltage and current measurement and completely synchronised data acquisition. The Dewesoft R8D power analyser makes it possible to measure 8x three phase systems within just one device. That unique feature allows to measure whole power systems (e.g. electric vehicle, aircraft, and ship) completely synchronous. It combines all functionalities of motor and inverter testing as described above and further allows to measure other parameters like speed, torque, temperature, video, GPS, CAN and a lot more as well.

Up to now typical test bed applications needs the usage a couple of instruments (Power Analyser, Scope, Data Logger, CAN reader etc.)  The Dewesoft Power Analyser makes it possible to do all these analysis within just one device. All data can be stored in the full-sampling rate and all analysis can be done already during measuring. The unique post-processing functionality allows also doing all analysis (mathematic, power analysis) after the measurement on the personal notebook. It’s even possible to change settings or correct for example phase voltages if they were connected wrong. In this case the measurement doesn’t have to be repeated. This is never experienced testing.

Highlights

• Efficiency, Power & Power Quality analysis
• Up to 8 three phase systems
• Different frequencies (DC, 16,7Hz/50Hz/ 60Hz/400Hz/800Hz/variable frequency)
• Raw data analysis, Transient recording, Data logging, Scope, Vector Scope
• Additional measurements like speed, torque, temperature, etc.

Typical configuration

• SIRIUS R8D
• 12x Voltage
• 12x Current
• 1x Torque
• 1x Speed
• Additional inputs (analogue, digital, counter, GPS, CAN, video, etc.)

For further information on the Dewesoft X in Australia or New Zealand, please contact Metromatics +61 7 3868 4255 or sales@metromatics.com.au

For outside this region please contact our supplier Dewesoft directly on +43 31 32 2252  or sales@dewesoft.com

The CSG110- Signal Conditioner (Amplifier)

The CSG110 is a General Purpose Amplifier solution for in-line amplification of any full bridge strain gauge type sensor with mV/V range output to provide VDC and/or Current output with built-in regulated bridge excitation source. The standard CSG110 is offered in a plastic housing, a mating DB9 female connector for power output side and DB9 Male connector for sensor side (Available in FSH01449, FSH03546, QSH00602 and QSH01498) offering a wide range power supply at 14 to 26 VDC. This model is also available in an OEM version (FSH01447, FSH01450). The CSG110 product is designed and manufactured by FUTEK in the USA.

To help our customers Futek has released a series of Videos showing how to use the CSG110 to its optimal usage. Below is the first in the series, showing how to wire and install the CSG110. Making it easier for you to get the best results from your application.  

For further information on Futek and its products please contact Metromatics +61 7 3868 4255 or sales@metromatics.com.au

For outside this region please contact our supplier Futek +1 949 465 0900 or ehsan@futek.com