Stock up on some Futek Reaction Torque Sensors for 2017

Futek Advanced Sensor Technology company have a large range of their flange to flange Torque Sensor Series (TFF)  that vary in size, capacity for inline/reaction torque measurements in stock and ready to ship - why not stock up on some for 2017?

	TFF325 and TFF350 OEM Reaction Torque Sensor Flange-to-Flange Our TFF Series features two miniature OEM models  - the TFF325 and the TFF350. • 0.12 Nm to 150 Nm capacity range • Intended for high volume applications • Easily integrates into OEM applications Find out more
	TFF400 Reaction Torque Sensor with Thru Hole Center The TFF400 Series has the most flexible mounting interface per capacity range. • 0.04 Nm to 56 Nm capacity range • Built-in overload protection on lower capacities • Designed for Torque auditing Find out more
	TFF600  Robust Flange-to-Flange Reaction Torque The TFF600 accommodates applications that include automotive braking, engine and transmission dynos,  fastener testing, and more. • 225 Nm to 1130 Nm capacity range • Aluminum & stainless-steel construction • Inside diameter of 1.75 in. Find out more

If you like further information on any of the Futek  Sensor product range and reside in Australia or New Zealand, please contact Metromatics on +61 7 3868 4255 or sales@metromatics.com.au  

For outside this area, please contact Futek directly on +1 949 465 0900

Application 312: Valve Torque Testing

Application Summary
Reaction torque sensors are often used as auditing and monitoring tools. This application utilises the TFF Series to measure the reaction torque required by an electric valve actuator/motor to operate a ball, plug, or butterfly valve.

Products in Use
FUTEK’s Reaction Torque Flange-to-Flange Sensor (TFF Series) paired with instrumentation (IAA Series analogue amplifiers, USB Solutions, and the IHH500 handheld display). View Product Details

How it Works
1.  In this application, a Reaction Torque Sensor is mounted between the electric valve actuator and valve housing.
2.  The valve stem passes freely through and does not make contact with the Reaction Torque Sensor.
3.  The TFF Series Reaction Torque Sensor measures the torsion/torque moments required by the valve actuator to operate the valve.
4.  The TFF Series measurements are then outputted to a digital display (IHH500), streamed to a PC using FUTEK’s USB solutions, or amplified with IAA series for using with PLCs and data acquisition devices.
5.  In addition, data can be viewed in real time and logged by operators using FUTEK’s SENSIT™ Test and Measurement Software.

If you like further information on any of the Futek  products used in this application and reside in Australia or New Zealand, please contact Metromatics on +61 7 3868 4255 or sales@metromatics.com.au  

For outside this area, contact FUTEK directly on +949 465 0900

TFF SERIES

Reaction Torque Flange-to-Flange Sensor

IAA SERIES

Analogue Amplifiers

USB SERIES

External High Resolution/Speed USB

Futek Application 314: Hinge Testing

Application Summary

Torque hinges, friction hinges, and position hinges are all synonyms for a type of hinge that allows two parts to rotate about one another when a load is applied. The hinge then returns to its original position when that load is removed due to its high torsional stiffness. Because of this property, they are used in everything, from cabinetry and car glove boxes to laptops and monitor stands. This wide range of uses requires that these hinges survive and very often exceed the lifetime of the product. To ensure this, fatigue and cycle testing must be performed to verify the hinge lifespan when integrated into the product.

Products in Use

FUTEK’s TFF400 Reaction Torque sensor paired with Instrumentation (USB220, IAA Amplifier). For more in-depth analysis of hinge performance, a TRS605 Rotary Torque Sensor with a built-in encoder paired with a USB520 can be used. View Product Details

 How it Works

1. The TFF400 torque sensor is mounted in line with the motor driving the automated cycling system.
2. Although the TFF400 is a reaction torque sensor, if the overall rotation is less than 360 degrees, you avoid the risk of the cable winding around the sensor.
3. The TFF400 is then mounted to the hub of a wheel. The rotation of the wheel will allow the hinge that is to be tested to open and close.
4. The TFF400 will then record the amount of torque needed to open and close the hinge.
5. If the motor is set in brake mode, the torque sensor will be able to measure the torque spring resistance and torsional stiffness.
6. A TFF400 paired with a USB220 can output the results of testing to a PC for data capture and analysis.
7. Additionally, a TRS605 paired with USB520 will allow for the logging of rotary angle data, enabling a study of torque versus hinge angle.

For more information on the Futek products used in this application and you reside in Australia or New Zealand, please contact Metromatics on +61 7 3868 4255 or sales@metromatics.com.au

For outside this area, please contact FUTEK directly on info@futek.com or +1 949  465 0900

Futek Sensor Technology Product Guide - now available

Great news! Our supplier Futek's 2015 product guide is now available. 

Click the picture above to download it today!

Futek manufacture high quality load cells, torque sensors,pressure sensors, multi axis sensors and related instrument and software products used in many industry applications such as medical, system integration, automation and robotics.

As you flip through this digital version, you’ll find new products, specific industry highlights, illustrations of sensors in use, and additional exciting information about what the team at Futek is doing. Go ahead and take a look.

For further information on Futek and its products please contact Metromatics +61 7 3868 4255 or sales@metromatics.com.au

For outside this region please contact our supplier Futek +1 949 465 0900 or ehsan@futek.com